// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
 * Copyright (C) 2022 MediaTek Inc.
 */
/dts-v1/;
/plugin/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/mt6886-pinfunc.h>
#include <dt-bindings/phy/phy.h>

&chosen {
bootargs_ext = "console=tty0 root=/dev/ram vmalloc=400M \
8250.nr_uarts=4 \
loglevel=8 \

initcall_debug=1";
};

&mtk_leds {
	compatible = "mediatek,i2c-leds";

	backlight {
		led_mode = <6>;
		gate_enable = <1>;
		pwm_config = <0 1 0 0 0>;
	};
};

&connfem {
/* Enable epa_elna node to support Wifi & BT ePA/eLNA FEM on customer load */
#if 0
	epa_elna {
		parts = <&wlan7207h &wlan7207c>;
		wifi {
			flags-0 {
				open-loop;
			};
		};
		bt {
			flags-0 {
				/* choose one of: epa_elna/epa/elna/bypass */
				epa_elna;
			};
		};
	};
#endif
};
&pio {
	mtkfb_pins_lcd_bias_enp1: lcd_bias_enp1_gpio {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO118__FUNC_GPIO118>;
			slew-rate = <1>;
			output-high;
		};
	};

	mtkfb_pins_lcd_bias_enp0: lcd_bias_enp0_gpio {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO118__FUNC_GPIO118>;
			slew-rate = <1>;
			output-low;
		};
	};

	mtkfb_pins_lcd_bias_enn1: lcd_bias_enn1_gpio {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO118__FUNC_GPIO118>;
			slew-rate = <1>;
			output-high;
		};
	};

	mtkfb_pins_lcd_bias_enn0: lcd_bias_enn0_gpio {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO118__FUNC_GPIO118>;
			slew-rate = <1>;
			output-low;
		};
	};

	mtkfb_pins_lcm_rst_out1_gpio: lcm_rst_out1_gpio {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO48__FUNC_GPIO48>;
			slew-rate = <1>;
			output-high;
		};
	};

	mtkfb_pins_lcm_rst_out0_gpio: lcm_rst_out0_gpio {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO48__FUNC_GPIO48>;
			slew-rate = <1>;
			output-low;
		};
	};

	mtkfb_pins_lcm_dsi_te: lcm_dsi_te {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO47__FUNC_DSI_TE>;
		};
	};

	mtkfb_pins_lcm_led_en1: lcm_led_en1_gpio {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO148__FUNC_GPIO148>;
			slew-rate = <1>;
			output-high;
		};
	};

	mtkfb_pins_lcm_led_en0: lcm_led_en0_gpio {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO148__FUNC_GPIO148>;
			slew-rate = <1>;
			output-low;
		};
	};
};

&mtkfb {
	pinctrl-names = "lcd_bias_enp1_gpio", "lcd_bias_enp0_gpio",
		"lcd_bias_enn1_gpio", "lcd_bias_enn0_gpio",
		"lcm_rst_out1_gpio", "lcm_rst_out0_gpio",
		"mode_te_te", "lcm_led_en1_gpio", "lcm_led_en0_gpio";
	pinctrl-0 = <&mtkfb_pins_lcd_bias_enp1>;
	pinctrl-1 = <&mtkfb_pins_lcd_bias_enp0>;
	pinctrl-2 = <&mtkfb_pins_lcd_bias_enn1>;
	pinctrl-3 = <&mtkfb_pins_lcd_bias_enn0>;
	pinctrl-4 = <&mtkfb_pins_lcm_rst_out1_gpio>;
	pinctrl-5 = <&mtkfb_pins_lcm_rst_out0_gpio>;
	pinctrl-6 = <&mtkfb_pins_lcm_dsi_te>;
	pinctrl-7 = <&mtkfb_pins_lcm_led_en1>;
	pinctrl-8 = <&mtkfb_pins_lcm_led_en0>;

	status = "okay";
};
&dispsys_config {
	pinctrl-names =
		"lcm_rst_out1_gpio", "lcm_rst_out0_gpio",
		"mode_te_te";
	pinctrl-0 = <&mtkfb_pins_lcm_rst_out1_gpio>;
	pinctrl-1 = <&mtkfb_pins_lcm_rst_out0_gpio>;
	pinctrl-2 = <&mtkfb_pins_lcm_dsi_te>;
	status = "okay";
};

&dsi0 {
	status = "okay";
	#address-cells = <1>;
	#size-cells = <0>;
	switch_fps = <120>;
	panel1@0 {
		compatible = "jdi,nt36672e,vdo,120hz";
		reg = <0>;
		pm-enable-gpios = <&pio 148 0>;
		reset-gpios = <&pio 48 0>;
		gate-ic = <4831>;
		pinctrl-names = "default";
		port {
			panel_in1: endpoint {
				remote-endpoint = <&dsi_out>;
			};
		};
	};
	panel2@0 {
		compatible = "jdi,nt36672e,vdo,60hz";
		reg = <1>;
		pm-enable-gpios = <&pio 148 0>;
		reset-gpios = <&pio 48 0>;
		gate-ic = <4831>;
		pinctrl-names = "default";
		port {
			panel_in2: endpoint {
				remote-endpoint = <&dsi_out>;
			};
		};
	};
	panel3@0 {
		compatible = "truly,td4330,cmd";
		reg = <2>;
		pm-enable-gpios = <&pio 148 0>;
		reset-gpios = <&pio 48 0>;
		gate-ic = <4831>;
		pinctrl-names = "default";
		port {
			panel_in3: endpoint {
				remote-endpoint = <&dsi_out>;
			};
		};
	};
	ports {
		port {
			dsi_out: endpoint {
				remote-endpoint = <&panel_in1>;
			};
		};
	};
};

/* GPS GPIO standardization start */
&pio {
	gps_pins_default: gps_default {
	};
	gps_l1_lna_pins_ol: gps-l1-lna0 {
		pins-cmd-dat {
			pinmux = <PINMUX_GPIO16__FUNC_GPIO16>;
			output-low;
		};
	};
	gps_l1_lna_pins_dsp_ctrl: gps-l1-lna1 {
		pins-cmd-dat {
			pinmux = <PINMUX_GPIO16__FUNC_GPS_L1_ELNA_EN>;
		};
	};
	gps_l1_lna_pins_oh: gps-l1-lna2 {
		pins-cmd-dat {
			pinmux = <PINMUX_GPIO16__FUNC_GPIO16>;
			output-high;
		};
	};
	gps_l5_lna_pins_ol: gps-l5-lna0 {
		pins-cmd-dat {
			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>;
			output-low;
		};
	};
	gps_l5_lna_pins_dsp_ctrl: gps-l5-lna1 {
		pins-cmd-dat {
			pinmux = <PINMUX_GPIO17__FUNC_GPS_L5_ELNA_EN>;
		};
	};
	gps_l5_lna_pins_oh: gps-l5-lna2 {
		pins-cmd-dat {
			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>;
			output-high;
		};
	};
};
&gps {
	pinctrl-names = "default",
		"gps_l1_lna_disable",
		"gps_l1_lna_dsp_ctrl",
		"gps_l1_lna_enable",
		"gps_l5_lna_disable",
		"gps_l5_lna_dsp_ctrl",
		"gps_l5_lna_enable";
	pinctrl-0 = <&gps_pins_default>;
	pinctrl-1 = <&gps_l1_lna_pins_ol>;
	pinctrl-2 = <&gps_l1_lna_pins_dsp_ctrl>;
	pinctrl-3 = <&gps_l1_lna_pins_oh>;
	pinctrl-4 = <&gps_l5_lna_pins_ol>;
	pinctrl-5 = <&gps_l5_lna_pins_dsp_ctrl>;
	pinctrl-6 = <&gps_l5_lna_pins_oh>;
	status = "okay";
};
/* GPS GPIO standardization end */

/* usb typec mux start */
&pio {
	sel_up: sel_high {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO92__FUNC_GPIO92>;
			output-high;
		};
	};

	sel_down: sel_low {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO92__FUNC_GPIO92>;
			output-low;
		};
	};

	sw_enable: sw_enable {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO80__FUNC_GPIO80>;
			output-low;
		};
	};

	sw_disable: sw_disable {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO80__FUNC_GPIO80>;
			output-low;
		};
	};

	ps_enable: ps_enable {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO95__FUNC_GPIO95>;
			output-high;
		};
	};

	ps_disable: ps_disable {
		pins_cmd_dat {
			pinmux = <PINMUX_GPIO95__FUNC_GPIO95>;
			output-low;
		};
	};
};

&ps5169{
	pinctrl-names = "enable", "disable";
	pinctrl-0 = <&ps_enable>;
	pinctrl-1 = <&ps_disable>;
	status = "okay";
};

&fusb304 {
	pinctrl-names = "sel_up", "sel_down",
		"enable", "disable";
	pinctrl-0 = <&sel_up>;
	pinctrl-1 = <&sel_down>;
	pinctrl-2 = <&sw_enable>;
	pinctrl-3 = <&sw_disable>;
	status = "okay";
};

&mt6375_typec {
	port {
		tcpc_typec_usb: endpoint@0 {
			remote-endpoint = <&ssusb_mux>;
		};
	};
};

&typec_mux_switch {
	orientation-switch;
	mode-switch;
	accessory;
	port {
		ssusb_mux: endpoint@0 {
			remote-endpoint = <&tcpc_typec_usb>;
		};
	};
};

/* usb typec mux end*/

&i2c6 {
	spk: speaker_amp@5c {
		compatible = "richtek,rt5512";
		#address-cells = <1>;
		#size-cells = <0>;
		#sound-dai-cells = <0>;
		reg = <0x5c>;
		status = "okay";
		sound-name-prefix = "Left";
	};
};

&sound {
	mediatek,spk-i2s = <3 0>;
	mediatek,speaker-codec {
		sound-dai = <&spk>;
	};
};

&pdc {
	pd-vbus-upper-bound = <9000000>;
};
#include "mediatek/cust_k6886_connfem.dtsi"
#include "mediatek/cust_mt6886_touch_1080x2400.dtsi"
#include "mediatek/cust_mt6886_camera_v4l2.dtsi"
#include <k6886v1_64/cust.dtsi>
/*End of this file, DO NOT ADD ANYTHING HERE*/